Lantech IWP-1000b/g is a reliable 802.11b/g WLAN with 2 ports LAN Access Point. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. Users are able to configure IWP-1000b/g by WEB interface via LAN port or WLAN interface. IWP-1000b/g provides dual Ethernet ports in switch mode, so that users can use Daisy Chain to reduce the usage of Ethernet switch ports.
With IEEE802.11b/g dual mode capability, IWP-1000b/g is able to operate with a maximum link speed of 54Mbps to maximize the capacity of communication channel. The security standards include WEP, WPA, WPA-PSK (TKIP, AES), WPA2, WPA2-PSK (TKIP, AES), 802.1X and Radius. These various kinds of security standards for WLAN are also configurable to ensure the security of data transmission.
Lantech IWP-1000b/g supports HTTPs protocol over LAN or WLAN to assure the data security when users make configuration remotely. IWP-1000b/g also support switch mode. Users are able to use the Daisy Chain to reduce usage of Ethernet switch port. The redundant DC power inputs help to guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.
Features:
- High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
- Highly Security Capability: WEP/ WPA/ WPA-PSK (TKIP,AES)/ WPA2/ WPA2-PSK (TKIP,AES)/ 802.1X Authentication supported
- Support X-Roaming < 100 ms
- Support wireless load balance
- Support AP/Bridge/Repeater/AP-Client Mode
- Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
- Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
- Secured Management by HTTPs
- Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
- Rigid IP30 housing for industrial environment
- DIN-Rail and Wall-mount enabled